TESTING RESULT
The Simulation of Real World - Cyclical Seawater Immersion for 180 Days Corrosion Results (Cyclic Corrosion Testing)
The Test Results for 180 Days Seawater Immersion Corrosivity (Phase 2)| The Self-Drilling Screws Test Results for 180 Days Seawater Immersion Corrosivity | ||
| Test Start Date | At 3:00 on September 24th, 2015 | |
| Sample QTY | 5 Pieces/Per Different Self-Drilling Screw | |
| Test Cycle Time Per Stage (Phase 1) | (Initial Period): 7 days’ immersion in seawater, and then another 3 days’ exposure to the sun (till 4th October, 2015). (Midterm): 2 days’ exposure to the sun after 3 days’ soaking in seawater, and this cycle was to repeat 4 times. ) (Final): 3 days’ exposure to the sun after 7 days’ soaking in seawater. The test ends at this stage. |
|
| Test Cycle Time Per Stage (Phase 2) | The self-drilling screws continued to be soaked when the phase 1 is completed. The cycle time for the Phase 2: 7 days’ exposure to the sun after 30 days’ soaking in seawater, and this cycle was to repeat again and again. |
|
| Total Test Cycle Time | 180 Days (From 2015/9/24 till 2016/3/21) | |
Picture 2: XIOD Coating Highly Corrosion Resistant Self-Drilling Screws(It Has Been Drilled)
Picture 3: XIOD Coating Highly Corrosion Resistant Self-Drilling Screws(Whole Brand New)
Picture 4: #410 Stainless Steel Self-Drilling Screws(Whole Brand New)
Picture 5: #302 SS Head Self-Drilling Screws(Whole Brand New)
